AKG

PZM11

Details
Variations

Professional flush-mount boundary layer microphone

$119.00119.0 each
Promotions

Add Headphones Over $19.95 to get Free 2 Day Shipping.

(Details)
Product Actions
Add to cart options
+

In stock and ready to ship

UPS-BOX Order by 00 hrs 33 mins with 2 Day Shipping and receive by Fri, Nov 16
Your zip code 20149 edit | Want it faster?
Listen up!

The PZM11 professional boundary layer microphone is designed for security and surveillance applications. The PZM11 is characterized by a consistent pickup anywhere around the mic. Low frequencies below the voice range are rolled off to reduce the pickup of heating, ventilation or air-conditioning rumble (HVAC noise). The high-frequency response is boosted slightly to aid clarity and articulation. The PZM11 has a mic-level output and is powered by 12-48V phantom power. Electronics on the rear of the plate offer screw terminals, eliminating the need for connectors.

Item# 3326H00010

General Specifications

Audio frequency bandwidth 80 - 20000 Hz
Equivalent noise level 26 dB-A
Sensitivity 5 mV/Pa
Signal to Noise 68 dB-A

Dimensions

Length 115 mm
Width 70 mm
Height 29 mm
Net Weight 71 g

Design

Finish off-white

Audio Output

Type screw material

Powering Interface

Voltage 12 to 48 V

Application

Retail Yes

Device

Boundary Layer Microphone Yes

Search Result For ""

How long will the PZM11 be available? If it is currently not available or will be discontinued is there a replacement?

Asked by: Bill

Question regarding If the mic in metal conduit, ground loops cause hum. If hum is present, unsolder the chip resistor labeled 000 on the printed-circuit board (R21 GND LIFT in Fig. 5). Or remove ground-lift jumper (R2) in diagram? Please clarify which

Asked by: DBorden
  • y_2018, m_11, d_13, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestions, tq_2
  • loc_en_US, sid_pzm11, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_akg
Sharing