AKG Acoustics GmbH

C 519 M/C 519 ML

  • Miniature condenser clip-on microphone for wind instruments, drums, and percussions
  • Miniature gooseneck for accurate microphone alignment
  • Including wireless direct adapter for easy use with AKG pocket transmitters
  • Detachable microphone cable
  • Transducer shock mount for high mechanical-noise rejection

The C 519 clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.

The C 519 M features an integrated, switchable bass cut for adjusting the microphone’s frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.

Versions:

C 519 M for external phantom powering
C 519 ML for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.

© 2008 AKG Acoustics GmbH


Polar patterncardioid
Frequency range60 Hz to 20 kHz
Sensitivity5 mV/Pa (-46 dBV)
Max. SPL130/132 dB SPL (for 1 %/3 % THD)
Equivalent noise level31 dB(A)
Signal/noise ratio (A-weighted)63 dB
Impedance<= 200 ohms
Recommended load impedance>= 2000 ohms
Current consumption<= 2 mA
Power requirementB 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
Connector3-pin mini XLR
Cable1.5 m (5 ft.)
Finishmatte black
DimensionsLength: 213 mm (8.4 in.) (microphone only); max. width: 47 mm (1.9 in.)
Net weightC 519 M: 195 g (6.9 oz.)
C 519 ML: 85 g (3 oz.) (microphone and cable)
Shipping weightC 519 M: 430 g (15.2 oz.)
C 519 ML: 310 g (11 oz.)


C 519 M/C 519 ML
High-resolution image (JPG, 959.65 KB)