AKG Acoustics GmbH

SR 40 DUAL

  • Two receivers in a single case minimize space requirements and cost.
  • All-metal case
  • Multichannel capability for simultaneous use of up to seven channels (maximum number of channel depends on local frequency plans).
  • High Definition Audio Performance technology ensures the legendary, realistic AKG sound and perfect audio transmission.

Only available in conjuction with a WMS 40 PRO SET DUAL:

 WMS 40 PRO VOCAL SET DUAL

 WMS 40 PRO INSTRUMENTAL SET DUAL

 WMS 40 PRO PRESENTER SET DUAL

Consumer Alert (for US users)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: The system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

© 2012 AKG Acoustics GmbH

The receiver shall be a UHF receiver with two fixed frequencies in the 710 MHz to 865 MHz band. The receiver shall provide an on/off switch and RF and power indicators. The audio bandwidth shall be 40 Hz to 20 kHz, with 0.8% typical THD at 1 kHz. The typical A-weighted signal/noise ratio shall be 110 dB(A). The audio output shall be a balanced TRS 1/4" jack, adjustable in level, and deliver 500 mV rms at rated deviation. The receiver shall be housed in a half-rack metal case for easy rack mounting.
 


THDtyp. 0,8 % (at 1 kHz)
Signal/noise ratiotyp. 110 dB(A)
ModulationFM
Audio outputsbal. 1/4" jack, output level adjustable, at rated deviation: 500 mV rms.
Power supply120/230 V AC
Dimensions200 x 190 x 44 mm (7.8 x 7.4 x 1.7 in.)
Net weight647 g (1.4 lbs.)