AKG Acoustics GmbH

C 562 CM

  • Small, low-profile boundary layer microphone
  • Wide frequency range
  • High sensitivity
  • Ideal for inconspicuous installation in a room
  • Suited for surveillance or recording

    • The C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL. The C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings, walls, tables, stage props, etc.

    Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording since a single microphone can cover an entire room. The supplied XLR phantom power adapter connects to the microphone cable through a miniature connector so installation holes can be smaller than the diameter of the phantom power adapter.

    © 2010 AKG Acoustics GmbH

    Omnidirectional boundary microphone. Applications: Live and studio recording, theater, stage miking, ticket window, bank counter, reception desk, restaurant, surveillance, conference. Frequency range: 20 to 20,000 Hz; sensitivity at 1 kHz: 25 mV/Pa; impedance: 600 ohms. Dimensions: 28 mm (1.1 in.) head dia.; 20 mm (0.8 in.) long. Net/shipping weight: 30/195 g (1.1/76.9 oz.).
     


    Polar patternomnidirectional (hemispherical)
    Frequency range20 to 20,000 Hz
    Sensitivity25 mV/Pa (-32 dBV)
    Max. SPL130 dB (k=1 %)
    Equivalent noise level16 dB-A
    Signal/noise ratio (A-weighted)78 dB
    Impedance600 ohms
    Recommended load impedance>2000 ohms
    Supply voltage9 to 52 V phantom power to DIN/IEC
    Powering<2 mA
    Connector3-pin XLR
    Cable0.5 m (20 in.)
    Finishmatte nickel plated
    Net weight30 g (1.1 oz.)
    Shipping weight195 g (76.9 oz.)


    C 562 CM
    High-resolution image (JPG, 122.47 KB)